Should you paint brick?

painters and decoratorsSometimes
People tend to paint a house exterior to pay for the brick
siding. This is because it is now weathered or stained and also a brick restoration’s cost is out of the question.
Painting brick is not advisable, because this substrate is very
porous and absorbent of moisture, therefore making painting difficult.
If you are set on it, there are some significant facts.

understand that painting brick isn’t reversible. You may repaint it to change the color however you will never be able to return to the
exposed appearance. If an improved look can be achieved by a cleaning or power-washing, or possibly a sandblasting you should always consider. Some Toronto painting companies are capable of such
work, and likewise should be offered in different cities as well. You might be surprised at the way in which the pricing compares to exterior painting’s alternative option. Some people’s main concern is that there is
old paint splatter in their brick home, and think hiring painters to
cover it up is the only solution.

Should you go ahead with painting,
you need to determine if your brick includes a sealer on it. Some sealers are
just about invisible to the eye, and can be tested by spraying water.
Then you have a sealer present if water beads on the surface. If this
is the situation, or you realize that your brick is totally raw, surface
preparation must be done in order to accomplish a sound and clean surface. Cleaning
or power-washing is essential to remove dirt and grime, in addition to
removing any loose mortar and debris that may have collected in the
joints or near soffits, etc.. It’s absolutely essential to allow
brick to dry later for 3-4 days minimum. This allows the
brick as moisture can be held by it for a while to wash out. As you do not want any loose material if there’s any dust or masonry it ought to be scraped with wire brushes. Gaps in the joints should be re-pointed, or filled up
properly, because deep holes will not get painted properly and enable
moisture to penetrate the wall, leading to problems later on.

Peeling paint on improperly prepared bricks… prevent this!

Do it right now – less headaches afterwards…

Your brick was sealed, you have to consider whether it’s paintable
directly or needs an additional primer. It is possible to simply attempt an adhesion
test, so allowing it to cure for a couple hours and painting some of the complete paint on, and wanting to rub it off. Then you’ll be fine if it can not be eliminated with your fingernail, and you just need a
premium quality paint. For unsealed surfaces, you need to use a
masonry primer. You will realize that a primer is going to reduce the
amount of paint required since it prevents and seals unnecessary
absorption. More importantly, the primer enables for great adhesion into
the brick, which can be a problem as time passes.

Its also extremely
significant to be certain all regions are sealed well with paint and primer,
because if water may get behind the paint and to the brick, like
through cracks, the moisture may lead to peeling and de-lamination of the
paint. The best deterrent to this is a high quality masonry primer,
because it’s designed to fight the natural chemistry of masonry
products when exposed to moisture, like efflorescence’s phenomenon. In which paint just peeled off without effort, my Toronto painting company has recently consulted a customer regarding such a problem with brick. The area in question was located close to the floor. The simple fact is that if you obey all
necessary steps to painting brick, premature failure can be caused by an inherent moisture problem. Paint may only do so much; but preparing and priming
properly are your best tools towards a long lasting paint job.


The Essential Prep Checklist

painters and decoratorsMaking
Your brick wall look as good as possible before painting guarantees a paint job, and will allow it to last. Do not forget these crucial

  • repointing the brick in which mortar has fallen out, worn away, or
    is just too heavy. This can be labor intensive depending on condition and the age of a brick wall, but well worthwhile.
  • Fill any openings from old house fixtures where screws and bolts were attached. Use exactly the mortar.
  • Clean mildew and dry thoroughly before painting. This is normally an
    issue near the ground or at areas where rain runoff accumulates.
  • If your brick is fairly porous, make sure to apply a fantastic amount of
    primer, 2 coats if essential, so that you build up the coating, and this
    will offer a smoother finish.
house painters

Lastly, you want to pick a finish paint that is going to look
Great while. A premium latex exterior paint at a
Finish is excellent update to an eggshell or satin for a, or looking
Extra durability and shine.